Table of Contents
Advertisement
Protocol™ Installation and
Service Manual
Installation
Overview
This section is limited to the information needed to set the Protocol™ Unit. Auxiliary
equipment information is found in the sections devoted to them or in the manuals
accompanying them.
Related information is contained in Protocol™ Planning Data and the Pumping Station
Planning Data.
Shipping Damage
All equipment should be thoroughly examined for shipping damage before and while
unloading.
This equipment has been carefully inspected at our factory, and the carrier has assumed
responsibility for safe arrival. If damaged, either apparent or concealed, the claim must be
made to the carrier.
Apparent Loss or Damage
If there is an obvious loss or damage, it must be noted on the freight bill or express receipt
and signed by the carrier's agent; otherwise, carrier may refuse claim. The carrier will
supply the necessary claim forms.
Concealed Loss or Damage
When loss or damage is not apparent until after equipment is uncrated, a claim for
concealed damage is made. Upon discovering damage, make request in writing to carrier
for inspection within 15 days and retain all packing. The carrier will supply inspection
report and required claim forms.
On Site Damage Control
The Protocol™ is shipped on skids with panels installed. Remove panels to access lifting
points on frame. Do not attempt to move the unit from the skids without first removing the
panels.
1
Advertisement
Table of Contents
Troubleshooting
