Unpack Your Product; Electrical Specifications - Fisher & Paykel 9 Series Installation Manual

UNPACK YOUR PRODUCT

Remove the warming drawer and accessories box from the packaging. Recycle the materials
that can be reused. Dispose packaging materials in accordance with local regulations on waste
disposal.
Inspect the warming drawer for any signs of damage. Do not install the warming drawer if it
has been damaged. If the product is damaged, contact your local Fisher & Paykel dealer.
6
All electrical work must be done by a qualified electrician, or a Fisher & Paykel trained and
supported service technician.
Supply
Service
Maximum Power
Power outlet*
Power cord (total length)
* The power outlet must be earthed and located within 900mm of the centre rear of the product.
RECYCLE
RESPONSIBLY

ELECTRICAL SPECIFICATIONS

WB60SD
220-240 VAC, 50/60 Hz
10 amp circuit
810 W
3-prong grounding-type
1800mm