Table of Contents
Advertisement
531476-1_A - 787c2_Eng.qxd
11/22/2005
Triplog Reset
Triplog Reset resets the Triplog to zero, and will appear in
the menu if a Temp/Speed Accessory is connected and the
paddlewheel has moved at least once, or if the GPS Receiver is connected. The Triplog
provides the following information: timer for elapsed time, distance traveled since last
reset, and average speed.
NOTE: See Setup Menu Tab: Select Readouts (Advanced) to find out how to display Triplog
information on the screen.
To Reset Triplog:
1. Highlight Reset Triplog on the Setup menu.
2. Use the RIGHT 4-WAY Cursor Control key to initiate Triplog Reset.
3. The Confirm dialog box will appear. To reset the Triplog, press the RIGHT Cursor
key once more. To cancel Reset Triplog, press the LEFT Cursor key.
Restore Defaults
Restore Defaults resets ALL menu settings to their factory
defaults. Use this menu choice with caution!
To Restore Defaults:
1. Highlight Restore Defaults on the Setup menu.
2. Use the RIGHT 4-WAY Cursor Control key to initiate restoring defaults.
3. The Confirm dialog box will appear. To reset the defaults, press the RIGHT
Cursor key once more. To cancel Restore Defaults, press the LEFT Cursor key.
3:22 AM
Page 102
95
Select Readouts
(Advanced, Sonar view only)
Select Readouts sets individual digital readouts on the
Sonar View. This Advanced feature allows you to select
what data will be displayed in each of 6 fixed-position
data windows arranged around the left and bottom
edges of the Sonar View screen, or whether a particular
window will be turned off, displaying nothing in that
area; you can access this menu choice only when in
Advanced User Mode (see Setup Menu Tab: User Mode.)
Data windows can display readouts from supported
accessories such as Temp/Speed. Each data window can
either be empty or contain one of the following:
Select Readouts
• Course
• Navigation
• Position
• Speed
Customized Sonar View
Default Sonar View
96
• Temperature
• Time + Date
• Triplog
• Voltage.
Advertisement
Table of Contents
