Boss DUAL CUBE LX Owner's Manual page 3

10
LOOPER indicator
You can use the looper by connecting a footswitch (FS-5U, FS-6,
FS-7; sold separately) to the FOOT SW jack (p. 7).
11
PHONES/REC OUT jack
Connect your headphones or headset mic here.
Adjust the headset mic volume with the [MIC VOL] knob.
* No sound is played through the unit's speaker while the PHONES/
REC OUT jack is in use.
* You may hear feedback with some headset mics if you raise the
volume too much. Also keep in mind that feedback may occur
between the headset mic and the speakers connected to the LINE
OUT jacks.
* Turn down the [MIC VOL] knob when plugging or unplugging a
cable into the PHONES/REC OUT jack. Also, make sure that the plug
is inserted fully into the jack. If a plug is not fully inserted with the
volume turned up, an unpleasant loud noise may be heard.
* Pin arrangement for PHONES/REC OUT jack (stereo, CTIA)
L
R
GND
MIC
12
[MASTER] knob
Adjusts the output volume.
13
POWER indicator
This indicator lights when the unit is turned on.
* When operating on battery power, the unit's POWER indicator
blinks if the batteries are nearly depleted. Replace the batteries as
soon as possible (p. 5).
Panel Descriptions
3