Before using this unit, carefully read "USING THE UNIT SAFELY" and "IMPORTANT NOTES" (leaflet "USING THE UNIT SAFELY" and Owner's Manual (p. 12)). After reading, keep
the document(s) where it will be available for immediate reference.
Panel Descriptions Top Panel 12 13 INPUT jack EQUALIZER Connect your bass guitar here. [BASS] knob [COMP/DRIVE] button Adjusts the sound level of the low-frequency range. Sets the comp and distortion effects. [MIDDLE] knob If this is “OFF”, these effects are not applied. Adjusts the sound level of the middle-frequency range.
Page 3
Panel Descriptions RHYTHM GUIDE The rhythm guide built into this amp features drum and percussion rhythm patterns that are useful when you’re practicing by yourself. Set this to the pattern you like when you practice, or use it as a metronome (p.
Page 4
Dedicated USB driver on the power while holding down the [MEMORY] button. You can connect the DUAL CUBE BASS LX via USB to your computer Standard OS USB Set the [AMP TYPE] knob to “FLAT”, and turn on the and use it with dedicated software. Using the dedicated software driver power while holding down the [MEMORY] button.
Page 5
Operating on Battery Power You can start/stop the rhythm guide (p. 6) and control the looper (p. 7) using your foot by connecting a footswitch (BOSS FS-6, FS-7 or This unit can be used with alkaline batteries or rechargeable Ni-MH FS-5U;...
Useful Functions Recalling a Memory Using the Memories Here’s how to recall the knob settings that are stored in memory. You can use the memory feature to store the current settings of the knobs, in three different sets of knob configurations for each amp type. Turn the [AMP TYPE] knob to select the amp type.
Page 7
LINK/AUX IN jack back to your mobile device. from your headset mic or Bluetooth audio using a mobile device. For details on i-CUBE LINK and on mobile device apps that can use i-CUBE LINK, visit the BOSS website. https://www.boss.info/...
Page 8
Bluetooth indicator go dark, or turn off the mobile device’s Bluetooth Bluetooth® Audio function. With the DUAL CUBE BASS LX, you can use Bluetooth audio functionality to Adjusting the Volume listen to music or music video played back on a mobile device through this unit’s speakers.
Page 9
Remove the “DUAL CUBE MIDI” device first that was registered on your mobile device, turn the mobile device’s Can’t connect to an app Bluetooth function off and then back on, and then connect using the settings in the app (DUAL CUBE BASS LX Editor). In your mobile device’s Bluetooth setting Make the connection from the settings of the app (DUAL CUBE BASS LX Editor), not from your mobile device’s...
Restoring the Factory Settings Here’s how to restore the settings of the to their factory-set condition (factory reset). MEMO You can use the dedicated software (p. 4) or an app on your mobile device (p. 9) to back up the settings stored on this unit. To save the settings, use the dedicated software or app on your mobile device to perform a backup.
Turn the unit off before installing BT-DUAL please be careful to avoid burning Before installing the BT-DUAL, you must first yourself. always turn off the DUAL CUBE BASS LX and unplug the AC adaptor. IMPORTANT NOTES Power Supply Additional Precautions • The Bluetooth®...