Location; Setup - Hoshizaki KML-631MAH Instruction Manual

Low-profile modular crescent cuber
Hide thumbs Also See for KML-631MAH:
Table of Contents

Advertisement

C. Location
This icemaker is not intended for outdoor use. Normal operating ambient
temperature should be within +45°F to +100°F (+7°C to +38°C); Normal
operating water temperature should be within +45°F to +90°F (+7°C to +3°C).
Operation of the icemaker, for extended periods, outside of these normal
temperature ranges may affect production capacity.
For best operating results:
• Icemaker should not be located next to ovens, grills or other high heat producing
equipment.
• Location should provide a firm and level foundation for the equipment.
• Allow 6" (15 cm) clearance at rear, sides and top for proper air circulation and ease of
maintenance and/or service should they be required.
D. Setup
1) Unpack the storage bin and attach the four adjustable legs provided (bin accessory) to
the bottom of the bin.
) Position the storage bin in the selected permanent position.
3) Place the icemaker on top of the storage bin.
4) Secure the icemaker to the storage bin, using the two universal braces and the two
bolts provided. See Fig. .
5) Level the icemaker/storage bin in both the left-to-right and front-to-rear directions.
Adjust the ice bin legs to make the icemaker level.
6) Replace the panels in their correct positions.
WARNING
Fig. 2
11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kml-631mrhKml-631mwh

Table of Contents