Fisher & Paykel ACTIVESMART RF605Q User's Installation Manual page 46

All models
PROBLEM
Water in the
vegetable bins.
Exterior of
cabinet is warm.
Warm spot on
central door
seal. (French
door models
only).
Condensation
on outside of
refrigerator/
freezer.
Condensation
inside fresh food
compartment.
Door handles
out of
alignment.
Tray/bin does
not slide in and
out evenly.
Appliance
operating
inefficiently.
Cannot adjust
temperature
in frozen food
compartment
44
TROUBLESHOOTING
POSSIBLE CAUSES
Condensation is formed by
the water produced by fruit
and vegetables.
This is normal.
You may feel a warm spot
at times on the central
seal between the two
refrigerator doors.
Not unusual during periods
of high humidity.
Frequent or long
door openings.
Door gasket leaking.
Not unusual during periods
of high humidity.
With time and usage,
movement may occur.
Packaging trapped.
Runners not extending fully.
Accumulation of dust on
or behind the rear
compartment cover.
Either Bottle Chill,
Fast Freeze or Ice Boost
is activated.
WHAT TO DO
A small amount of condensation
is beneficial for fruit and
vegetable storage.
Wipe out water with a cloth.
This is perfectly normal and is part
of the normal refrigerator operation.
Wipe dry.
Minimise door openings.
Check that gasket is sitting flat and
sealing tightly.
Wipe dry.
Refer to section
'Installation instructions'.
Check to ensure no food or
packaging is trapped behind the
tray/bin.
Holding onto sides of tray/bin,
extend the runners fully by using a
firm pull — this will reset the runner.
Refer to section 'Cleaning and care'.
If problem persists please contact
Customer Care.
Deactivate Bottle Chill, Fast Freeze or
Ice Boost if function is not desired.