Fisher & Paykel ACTIVESMART RF605Q User's Installation Manual page 36

ACTIVESMART™ OPERATING INSTRUCTIONS
Glass shelves – Freezer
Some models have glass shelving under the freezer bins. These can be
removed if required.
To remove
Remove the bin above the glass shelf (refer to 'Fixed bins')
1
Push on the clips below the bin runners on both sides of the shelf (A)
2
Lift the shelf up to remove from the supports
3
Drip tray
(Water dispensing models only)
The drip tray is designed to fit into the
● ●
bottom of the water dispenser panel.
To insert the tray ensure the
● ●
rounded sides are fitted into the
dispenser panel first.
The purpose of the tray is to
● ●
capture drips of water that may fall
after dispensing.
The tray can be removed for cleaning.
● ●
34
A
Drip tray