Cisco Catalyst 3560-E Getting Started Manual page 13

Warning To prevent bodily injury when mounting or servicing this unit in a rack, you must take
special precautions to ensure that the system remains stable. The following guidelines
are provided to ensure your safety:
•
This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
•
When mounting this unit in a partially filled rack, load the rack from the bottom to the top with
the heaviest component at the bottom of the rack.
• If the rack is provided with stabilizing devices, install the stabilizers before mounting or
servicing the unit in the rack.
Warning This unit is intended for installation in restricted access areas. A restricted access area
can be accessed only through the use of a special tool, lock and key, or other means of
security. Statement 1017
Warning Only trained and qualified personnel should be allowed to install, replace, or service this
equipment. Statement 1030
To comply with the Telcordia GR-1089 Network Equipment Building Systems (NEBS)
Caution
standard for electromagnetic compatibility and safety, connect the Ethernet cables only to
intrabuilding or nonexposed wiring or cabling.
The grounding architecture of this product is DC-isolated (DC-I)
Note
Statement 1006
13