Denon AVR-X2300W Service Manual page 117

3-4. Operation Info Mode
3-4.1. Actions
This mode enables the unit to display the accumulated operating time, power On count and each pro-
tection count.
3-4.2. Starting up
AVR-X2300W
· While holding down buttons "ZONE2 SOURCE", "DIMMER" and "STATUS" simultaneously, press the
power button to turn on the power.
AVR-S920W
· While holding down buttons "TUNER PRESET CH+", "TUNE -" and "TUNE +" simultaneously, press
the power button to turn on the power.
Select the "4. OP INFO" using the "TUNER PRESET CH+" button, then press the "STATUS" button
then to confirm.
3-4.3. Operations
Press the "STATUS" button after starting up this device in Operation Info mode.
The following information is displayed in the following order.
(a) Accumulated operating time
OP Time ______H
↑ Time display
"STATUS"
(b) Power On count
P.On Time______
↑ Count display
"STATUS"
(c) DC / ASO Protection count
DC:___/ASO:___
"STATUS"
(d) Thermal Protection (A/B) count
THM A:___/B:___
"STATUS"
(e) Thermal Protection (E/F) count
THM E:___/F:___
"STATUS"
(f) Current Protection count
Current:___
"STATUS"
(Returns to normal display)
117