To configure a Programmable Key as a Speed Dial key on a DT900S touch phone
1. When the phone is in idle state, press
2. Press
. The Speed Dial key LED starts flashing.
For Speed dial keys that have already been configured, the Speed Dial
information is shown.
3. Enter a name for the Speed Dial key. Then press
between uppercase keypad entry mode.
4. Enter a phone number for the entry and press
5. Press
to use this Speed Dial Key number, or use the keypad to edit the
number.
Note that only digits, * and # are accepted as numerical input in a Speed Dial.
6. Select the monitor settings for the Speed Dial and then press
7. Select Show in Directory if you want to also add this entry to your Personal
Directory, and press
.
8. Press the Save Soft Key to save the information.
9. Press the Exit Soft Key to exit the Speed Dial Programming mode.
To originate a call from a Speed Dial Key
1. Press the desired Speed Dial Key, or
2. Lift the handset and press the desired Speed Dial Key, or
3. Press the Speaker key and press the desired Speed Dial Key.
P/N 610‐429r0‐enUS 11/2019
>.
. Use the * key to switch
.
.
DT900/DT900S – Quick Reference Guide
5