Frequently Asked Questions; Problem Solving Guide; The Wash Program Will Not Start - Miele PWM 912 Operating And Installation Instructions

Frequently asked questions

Problem solving guide

With the help of the following guide, minor faults in the performance of the machine, some
of which may result from incorrect operation, can be resolved without contacting Miele
Technical Service. This will save time and money.
The following guide may help you to find the reason for a fault, and how to correct it. You
should, however, note the following:
 Repair work to electrical appliances must only be carried out by a suitably qualified
person in strict accordance with current local and national safety codes. Repairs and
other work by unqualified persons could be dangerous.

The wash program will not start.

Problem
The display remains dark,
and the Start/Stop sensor
control does not light up
or flash.
There is a fault message
on the display
The display is blank and
the Start button indicator
is flashing slowly.
34
Possible cause and solution
There is no power to the machine.
Check whether the washing machine is switched on.

Check whether the washing machine is connected to the

power supply.
Check whether the circuit breaker has tripped.

The washing machine has switched off automatically to
save energy.
Switch the washing machine back on with the  button.

A program cannot be started while there is a fault message
on the display.
Note the information on the display.

The display has switched off automatically to save energy
(Standby mode).
Press any button. Standby will end.
