Cisco Catalyst 3032 Getting Started Manual page 4

Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Getting Started Guide
Switch Description
The switch runs the universal software image that has the Cisco IOS code for
multiple feature sets. To enable a specific feature set, you must use the software
activation feature to install the software license for that feature set. For more
information, see the Cisco Software Activation Document for Dell, the release
notes, and the software configuration guide on Cisco.com.
Figure 1
The other switch models have similar components.
Figure 1
1
2
3
4
5
6
7
For more information about the LEDs and their meanings, see the switch
hardware installation guide on Cisco.com.
Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Getting Started Guide
4
shows the Cisco Catalyst Blade Switch 3130 for Dell as an example.
Switch Front Panel
1
2
4
3
Switch
StackWise Plus ports A and B (supported
only on the 3130G-S and 3130X-S
switches)
Gigabit Ethernet uplink ports 17 to 20
LEDs for ports 21 and 22
10-Gigabit Ethernet slot 1
or Gigabit Ethernet ports 21 and 22
LEDs for ports 23 and 24
10-Gigabit Ethernet slot 2
or Gigabit Ethernet ports 23 and 24
5
6
7
8
9
10 System Status/ID LED
11 Mode button
12 Console port
13 Power LED
8
9
10
11
12
13
Release latch
Cisco status LEDs
OL-14317-01