Cleaning And Maintenance; Cleaning And Sanitizing Instructions - Hoshizaki DCM-750BAH Instruction Manual

III. Cleaning and Maintenance
Ensure all components, fasteners, and thumbscrews are securely in place after
any cleaning or maintenance is done to the equipment.
A. Cleaning and Sanitizing Instructions
HOSHIZAKI recommends cleaning this unit at least twice a year. More frequent
cleaning, however, may be required in some existing water conditions.
1. To prevent injury to individuals, do not use any ammonia type cleaners.
. Carefully follow any instructions provided with the bottles of cleaning and
sanitizing solution.
3. Always wear liquid-proof gloves to prevent the cleaning and sanitizing
solutions from coming into contact with skin.
4. After cleaning, do not use ice made from the cleaning and sanitizing
solutions. Be careful not to leave any solution on the parts or in the storage
bin.
Power Switch
Agitating
Motor
Dispensing
Motor
Control Switch
Dispense Mode Switch
Note: DCM-500 is shown. Models DCM-750BAH(-OS) and
IMPORTANT
Extruding Head
Reservoir
DCM-750BWH(-OS) have two agitators.
WARNING
Spout A
Spout B
Fig. 6
1
Evaporator Assembly
Agitator
Dispensing
Auger