Extension Bar Positioning - JBL VTX Series Rigging Manual

VTX A8 | Rigging Manual

8.6 - EXTENSION BAR POSITIONING

There are two different positions that can be used to attach the Extension Bar to the Array Frame depending on the overall array angle
(tilt) needed. The normal orientation has the extension bar extending towards the rear of the array which allows for the maximum pos-
sible down-tilt. The revered orientation has the extension bar extending towards the front of the array which allows for the maximum
possible up-tilt. This orientation is usually used when the array is trimmed lower than the highest seat of the venue and when the array is
required to point upwards. The VTX A8 cabinet connected to the array frame is always set to the 4° position regardless of the extension
bar orientation.
NORMAL (REAR) REVERSED (FRONT)
Pin Position: 4°
30