Variable Speed Control; Cleaning Stairs; Cleaning Tools - Hoover S3332 Owner's Manual

2-5
Variable speed
control
The variable speed control (E) is
located on top of the cleaner.
Slide the control toward — to reduce
energy consumption and to clean
lightly soiled areas or delicate fab-
rics.
Slide the control toward
mum cleaning power in heavily
soiled areas.
If the floor nozzle is difficult to push,
slide the control toward —.
2-8

Cleaning tools

Tool storage
Lift tool lid to reveal tool storage
compartment.
2-10
Attaching tools
The tools, including floor nozzle, are
attached to the hose or the wand in
the same manner. Push tool firmly
onto hose; twist tool slightly to tight-
en or loosen connection.
2-6
E
Suction regulator
The suction regulator on the wand
allows the user to reduce suction
when necessary. Open the suction
regulator for less suction when
cleaning lightweight fabrics or throw
rugs. Close the suction regulator for
maximum suction.
+
for maxi-
A variety of useful cleaning tools is
included with your cleaner. These
tools and their uses are shown
below:
2-9
Selecting tools
1. Crevice tool may be used in tight
spaces, corners and along edges in
such places as dresser drawers,
upholstered furniture, stairs and
baseboards.
2-11

Cleaning stairs

Clean stairs by placing cleaner on
end as shown. Clean stairs from bot-
tom to top.
1
2
3
2-7
F
G
Wand storage clip
The wand storage clip (F) fits into
the slot (G) at the rear of the cleaner
or the slot (H) on the bottom of the
cleaner.
2. Furniture nozzle may be used
for upholstered furniture, draperies,
tapestries, mattresses, clothing,
automobile interiors and carpeted
stairs.
3. Dusting brush may be used for
carved furniture, table tops, books,
lamps, lighting fixtures, venetian
blinds, baseboards, shutters and
registers.
H
5