Device - Honeywell Friedland GlobalGuard Operating Manual

2-6-4. Device

To maintain the contents of device information, select
[Setting] in the Top Menu and click [Device] on the
menu to the left. You will see the devices that have
completed the code learning process in the window on
the right. Simply click the desired device to access the
edit window.
Example: The following window will appear when you
click "On/Off Plug 1".
: Use this function to display which
Programme(s), Event(s) or Schedule(s) it will operate
with.
: Use this function to remove the selected
device from the Control Panel. When you use this
function to remove a device, all functions that involve
the use of this device will be removed as well (including
Programmes, Events, Schedules). If you have to
purchase a new device to replace a faulty one, it is
recommended that you use the Add Device – Replace
Device for the replacement. If you remove the device
and add it again, you will have to reconfigure all
relevant settings that you have previously made
before.
: Different device types would have different
advanced settings.
Example: When you click
window will pop up.
This means that the selected ON/OFF Plug is used in
all the functions (represented by different icons)
appearing in the window.
Example: Click
will be displayed.
In above example (ON/OFF plug), "All On" enabled
means that the device will operate when the "All On"
function is selected to operate the device in a home
automation Programme, Event or Schedule
19
, the following
and the following information