Daewoo DLT-26C2 Service Manual page 14

1) S10 key : svc. 060906 B3 (example)
2) RECALL key : exit
3) S10 key (4 times) : CPU off => Main power off : exit
11. Inch option item
* AUO, LPL PANEL
1) S11 key : Inch option <26"A>
2) S11 key : Inch option <37"L>
3) S11 key : Inch option <32"A>
4) RECALL key : exit
* SEC PANEL
1) S11 key : Inch option <26"S>
2) S11 key : Inch option <32"S>
3) RECALL key : exit
12. Shipping item (S12
1) S12 key : Factory Out going
*Adjustment remote controller
User remote controller : R-55A01
Service remote controller : R-34SVC
3. White balance adjusting method.
1. Press the S1 button, heat-run the set in full-white mode more than 30 minutes.
2. Apply High/Low pattern of white balance tester to video input terminal(croma:off, reference:G)
3. Adjust picture mode to "normal"
4. Attach a sensor of white balance meter to the center of the screen.
5. Press S8, then the set entered white balance adjustment mode.
6. High beam(200cd) : adjust white balance by varying gain of R, B (G fixed)
and press menu key to change High beam pattern.
7. Low beam(50cd) : adjust white balance by varying offset R, B (G fixed)
* Coordinate of color is x= 275±10, y=285±10.
8. To exit from service mode, press S8, or turn off the TV.
(S11 key)
key)
y