After successfully configuring the settings, you will see the following displays in
quick succession:
Connection wizard complete:
Connection Wizard
‰
Connection
assignment
complete.
Installation is complete.
Date & time
There are three methods of setting the date and time:
By default, the date and time is transferred to your desktop phone from a time
u
server on the Internet as soon as the desktop phone is connected to the Internet.
You can activate/deactivate the synchronisation with a time server via the Web
configurator. Detailed information can be found in the Web configurator's user
guide on the enclosed CD.
If synchronisation with the time server is unsuccessful (no connection to the
u
Internet/time server), the desktop phone assumes the date and time from the
ISDN network during the first outgoing external call.
You can also set the date and time manually via the phone menu or one of the
u
registered handsets. Further information can be found in the long user guide for
the desktop phone on the enclosed CD.
Please note
If the date and time have not been set, the time will flash in the desktop phone's
idle display (00:00) and
To set the date and time manually, you must press the right display key
and enter the date and time.
Installation wizard complete:
§Time§
is displayed above the right display key.
Taking the first steps
Setup
‰
Setup
complete
§Time§
21