Install Software And Drivers - Omega OM-143 User Manual

(left photo on previous page). Push back the cover (middle
photo), remove the old battery (right photo) and insert a fresh
battery in the correct orientation. Then replace the cover,
pushing it forward until you feel and hear a click.
After you replace the battery, the LCD will "wake up" and
begin displaying real-time readings. If the MODE button is not
pressed within 60 seconds, the LCD will be automatically
powered off.
Note: If the battery is removed from a unit before it has been
set up from software or while it is recording, the unit must be
reconfigured before it can be reactivated. If it is not
reconfigured, the unit will remain in standby mode.

INSTALL SOFTWARE AND DRIVERS

1. Place mini-disc in tray of CD/DVD drive, shiny side down.
Close tray.
2. When the AutoPlay window appears, click on "Open folder
to view files using Windows Explorer."
3. Windows Explorer will indicate that there are two "Files
Currently on the Disc". One is actually a folder containing
a PDF of the OM-143 user's manual (as well as PDFs of the
manuals for the OM-141 and OM-144—versions of the
OM-143 without an LCD and with an IR thermometer). Copy
the OM-143 manual to your computer's hard drive for
permanent storage. The other file is a Windows Installer
Package (.msi file) named "ELusb_V1.23.1.msi". Double-
click its
4. A window titled "Welcome to ELUsb Installation Wizard"
will appear. Click Next to continue.
5. Within the Software License Agreement window that
appears next, click the I agree (T) box.
8
icon.