Table of Contents
Advertisement
TOOLS
You will need these tools to assemble your kit.
*T0 REMOVE SOLDER FROM CIRCUIT CONNECTIONS.
ASSEMBLY
1.
Follow the instructions carefully. Read the en
tire step before you perform each operation.
2.
The illustrations in the Manual are called Picto
rials and Details. Pictorials show the overall op
eration for a group of assembly steps; Details
generally illustrate a single step. When you are
directed to refer to a certain Pictorial "for the
following steps," continue using that Pictorial
until you are referred to another Pictorial for
another group of steps.
ASSEMBLY NOTES
3.
Most kits use a separate "Illustration Booklet"
that contains illustrations (Pictorials, Details,
etc.) that are too large for the Assembly Manual.
Keep the "Illustration Booklet" with the As
sembly Manual. The illustrations in it are ar
ranged in Pictorial number sequence.
4.
Position all parts as shown in the Pictorials.
5.
Solder a part or a group of parts only when you
are instructed to do so.
HEATHKIT
SOLDER I NG
IRON
Advertisement
Table of Contents
