Lcd System Adjustments - Sony DCR-SR32E Manual

1-9.

LCD SYSTEM ADJUSTMENTS

1. Function of Each Button on LCD System Adjust-
ment Screen
Click the [LCD SYSTEM ADJUSTMENT] button on the Main Menu
screen, and the "LCD SYSTEM ADJUSTMENT" screen in Fig.
6-1-19 will appear.
Fig. 6-1-19
2. Adjustment Items of LCD System Adjustment
The adjustment items of LCD system adjustment are as listed in
Table 6-1-7. The Automatic Adjustment Program executes the ad-
justment items if the LCD Adjustment Start button is clicked.
Button Name
VCO Adj.
Contrast Adj.
LCD
V-COM Adj.
Adjustment
Transmissive Mode White Balance Adj.
Reflective Mode White Balance Adj.
(MEGA model only)
Touch Panel
Touch Panel Adj.
Adjustment
Note: The adjustment data cannot be read or written from the SeusEX.
DCR-SR32E/SR33E/SR42/SR42A/SR42E/SR52E/SR62/SR62E/SR72E/SR82/SR82C/SR82E_ADJ
1
2
3
Adjustment
Table 6-1-7
1 [To Menu] button
The Main Menu screen comes back.
2 [Start] button
Each adjustment "LCD Adjustment" or "Touch Panel Adjust-
ment" starts.
3 [Release Data Setting] button
The data setting at the adjustment is cancelled.
During the data setting, the button color changes from "white"
to "red". When the data setting is cancelled, the button color
returns to "white".
(Use this button when an error occurred in the LCD adjust-
ment. If the adjustment completed successfully, the data set-
ting is automatically cancelled and the button color returns to
"white".)
Adjusting Address
Block Page
1050 (NTSC model),
10 60
1051 (PAL model)
10 60 1058
10 1052
60
10 1056, 1057
60
10 107B, 107C
60
(Note)
6-42
Address