Empire Comfort Systems White Mountain Hearth DVCX36FP91N-1 Installation Instructions And Owner's Manual page 49

REMOTE CONTROL OPERATION INSTRUCTIONS
ACCENT LIGHT CONTROL
The light function controls the light by the dimmable light control.
To activate this function, use the Mode Button (Figure 57a) to
index to the Light icon. See Figures 70 and 71.
The intensity of the output can be adjusted through six levels.
Use the Up/Down Arrow Buttons (Figure 57a) to adjust the out-
put level. A single "beep" will confirm reception of the command.
OFF
OFF
35362-5-0217
Figure 70
Figure 71
CONTINUOUS PILOT/INTERMITTENT PILOT (CPI/IPI) SELECTION
With the system in "OFF" position press the MODE key (Figure
57a) to index to the CPI mode icon. See Figures 72 and 73.
Pressing the UP ARROW key will activate the Continuous Pilot
Ignition mode (CPI).
Pressing the DOWN ARROW key will return to IPI.
A single "beep" will confirm the reception of the command.
Figure 72
Figure 73
Page 49