Figure - Cisco 124792 User Manual

Chapter 2 System Installation

Figure 2-3

Move the system shelf to the desired rack/cabinet slot (allowing 1RU above the shelf if a 1 RU
Step 2
Distribution shelf will be installed).
Secure the system shelf to the rack using the six included mounting screws
Step 3
Figure 2-4
Continue with the
Step 4
system has no external distribution, place the 4 power connectors and alarm cables on the top of the
system shelf to aid in future 1 RU Distribution Shelf installation
the"2.2.3 Install the Ground Cable" section on page
May 2006
ETSI Shelf Ear Mounts (system shelf and 1RU Distribution Shelf)
Installing the System Shelf
"2.2.2 Install the 1 RU Distribution Shelf" procedure on page 2-6
2.2.1 Install the System Shelf
(Figure
(Figure 2-5) and continue with
2-9.
Cisco AC/DC Power System User Guide, R1.0
2-4).
if applicable. If this
2-5