Hitachi CP-S335 User's Manual And Operating Manual page 71

Operating Operating
WARNING ►When the power is on, a strong light is emitted. Do not look
into the lens or vents of the projector.
Turning on the power
1. Set the power switch to the ON position.
2. Press the STANDBY/ON (projector or
remote control) button.
Displaying
1.
To select an input signal, use the button of INPUT (projector), or the buttons
of RGB, VIDEO or SEARCH (remote control).
2. To change the aspect ratio, use the button
ASPECT (remote control).
3. To adjust the zoom and focus, use the
zoom knob and the focus ring.
LAMP
indicator
TEMP
indicator
POWER
STANDBY/ON
indicator
STANDBY/ON
button
Turning off the power
1. Press the STANDBY/ON (projector or remote control) button.
The message "Power off?" will appear on the screen for approximately 5 seconds.
2.
Press the STANDBY/ON (projector or remote control) button again while the
message is visible.
The projector lamp will go off, and the POWER
indicator will begin blinking orange. Then the
POWER indicator will stop blinking and light to
solid orange when the lamp cooling is complete.
3. Make sure that the power indicator lights to solid
orange, set the power switch to the OFF position.
The POWER indicator will go off.
MENU
button
LAMP
Cursor
TEMP
buttons
POWER
INPUT
INPUT
button
MENU
Power switch
(Solid orange)
(Blinking green)
Zoom knob
Focus ring
VIDEO button
ASPECT button
VIDEO
HOME button
ASPECT
MAGNIFY
MAGNIFY
ON button
OFF button
FREEZE
END button
FREEZE button
POSITION
POSITION button
Cursor buttons
ESC
ESC (Escape) button
POWER
Operating
POWER
POWER POWER
(Solid green)
SEARCH button
RGB
button
STANDBY/ON
button
STANDBY/ON
SEARCH
RGB
AUTO button
AUTO BLANK
BLANK button
HOME PAGE UP VOLUME
ON
VOLUME button
END PAGE DOWN MUTE
OFF
KEYSTONE
PAGE UP button
MUTE button
MENU
KEYSTONE
ENTER
button
RESET
PAGE DOWN
button
MENU button
ENTER
RESET button
button
POWER
(Blinking orange)
(Solid orange)
7