Pump; Flow-Meter; Boiler - Philips Saeco Moltio Service Manual

MOLTIO

7.10. Pump

Disconnect the water circuit,
electrical and remove the pump
from the bottom support

7.11. Flow-meter

7.12. Boiler

Remove the cover of the boiler by pressing the two sides with the help of a screwdriver
Unscrew the pump from the safety
valve and slip off the pump off the
upper support
Lift the flow meter out of the casing
assembly and remove the electrical
and water circuit connections.
Unscrew the screw shown
and remove the electrical and
water circuit connections.
07 DISASSEMBLY
8/11