Advertisement
10
备用电池的安装和更换
备用电池的作用是保证坐便器在异常断电后仍有冲水功能。
（新机通水前请安装备用电池）
若停电后按冲洗键机器不能冲水，可能是备用电池电量不足所致，
请更换电池。
备用电池安装更换/更换步骤：
1.拔掉主机电源插头。
2.抬起上盖。
3.打开电池盒后盖。
4.安装/更换电池，注意电池的正负极方向。
5.按压坐便器侧面的冲水旋钮，确认能正常冲水。
6.盖回电池盒后，重新固定好整机上盖。
7.恢复主机电源插头与插座的连接。
Install or replace spare battery
The backup battery is used to ensure that the toilet can still flush
after abnormal power failure.
(Please install the battery before confirm the water)
If the machine cannot flush after pressing flush button after
power failure, it may be caused by insufficient power of the
spare battery, please replace the battery.
The steps of Install or replace the spare battery:
1.Unplug the power plug.
2.Lift up the toilet seat.
3.Open the lid of the battery case.
4.Install/replace spare battery, pay attention to the positive and
negative directions of the battery.
5.Press knob with the function of flush on the side of the toilet
confirm normal flushing.
6.Cover the lid of the battery case, reinstall the toilet seat.
7.Restore the connection between the power plug of the toilet
and the socket.
11
12
Advertisement
