Advertisement
预润净瓷Pre-flushing
着座后自动开启预润净瓷功能。当系统检测到着座时，出少量水
使陶瓷壁湿润，避免因为陶瓷壁太干燥导致挂污。
自动断电Automatic power off
系统检测连续24小时无任何操作，将自动关闭座圈加热。
当您和家人外出旅游或者出差时，系统检测连续24小时无任何
●
操作，将自动关闭座圈加热。
当系统检测到有操作时，自动恢复座圈加热功能至之前设置。
●
离座冲水Automatic flushing
人离开座圈5秒后，自动冲洗坐便器一次。
※当人坐在座圈上，使用遥控器或侧面旋钮冲刷过坐便器，
人离座后离座冲水将不再启动。
一. 塑料制品部分、陶瓷的清洁保养
当产品附着灰尘或污垢时，请用柔软的湿布擦拭产品。
●
陶瓷部分可用柔软的刷子、抹布或海绵，以中性清洁剂加凉水
●
或温水进行清洗。
注意：请勿使用不合适的清洁剂，如：
厕所清洁剂、酒精、甲酚、苯、去污粉、
漂白剂、天那水、涂料稀释剂、住宅清
洁剂、汽油、煤油、刹车油、11%氢
氧化钠、23%氢氧化铵、去污剂
TritonX-100等。
Automatically turn on the pre-flushing function after seated.
When the system detects seating, a small amount of water is
released, wet the ceramic wall to avoid stains.
The system detects that there is no operation for 24 hours, and it
will automatically turn off the seat ring heating function.
When you and your family are traveling or on business, the
●
system detects that there is no operation for 24 hours will
automatically turn off the seat ring heat.
When the system detects that there is an operation, it will
●
automatically restore the seat heating function to the previous
set.
The toilet will be automatically flushed once after the person
leaves the seat for 5 seconds.
※When people sit on seat and flush the toilet with remote
control or side knob, after leaving the seat, automatic flushing
will not working.
Cleaning and Maintenance for Plastic
Parts and Ceramics
When the product adheres to dust or dirt, please wipe the
●
product with a soft damp cloth.
The ceramic part can be cleaned with a soft brush, rag or
●
sponge, with a neutral detergent and cold or warm water.
Note: Do not use cleaners like toilet cleaners, alcohol, cresol,
benzene, detergent, bleach, thinner, paint thinner, house
cleaner, gasoline,
kerosene, brake oil, 11%NaOH, 23%NH OH,
detergent TritonX-100,
etc.
Advertisement
