Table of Contents
Advertisement
NFPA Standard-Specific Requirements
Cutting TBL Jumper allows the
reverse polarity circuit to open
with a system trouble condition
if no alarm condition exists.
176
NFPA 72 Remote Station Protective Signaling System
Notes:
1. Cut Jumper JP3 on the MS-9200UDLS main circuit board to supervise placement
of the 4XTMF module.
2. Refer to "4XTMF Transmitter Module Installation" on page 38 for detailed
information.
RS82 Remote Station Receiver UL listed.
Refer to Instruction Manual for Remote Station Receiver
Model RS82.
Figure C.2 Remote Station Connection Using 4XTMF Module
Polarity Shown is
+
-
Normal Standby
+
Power-limited
-
Ω
(Dummy load with a 4.7K
resistor when no connection is made)
4XTMF Transmitter Module
MS-9200UDLS PN 52750:A 11/04/05
Correlations
, ¼ watt
Advertisement
Table of Contents
