Samsung WW6000J Series Service Manual page 28

No. Part
19 HEATER
28 _ Removal and Reassembly
WW22K6800AW-A2.indb 28
Description
1. Separate the Back Cover.
2. Separate the Connection
Housing (3).
3. Remove the nut holding the
heater and separate the
Heater.
4. Remove the Heater from the
Tub.
Caution
Make sure to insert the Heater
into the correct position of the
bracket inside the Tub when
reassembling it. Otherwise,
there is a danger of a fire.
Make sure to push it inwards until the
packing part comes into the Tub completely
when reassembling it so that the packing
part is completely stuck to the Tub.
Fasten the holding nut with a force of 5Kgf/ cm2.
If the nut is not fastened properly, there is a danger of water
leaking.
Figure
2015/12/3 16:08:52