Samsung WW6000J Series Service Manual page 25

No. Part name
BUBBLE
14
PUMP AND
DRAIN PUMP
WW22K6800AW-A2.indb 25
Description
10.Disconnect the terminal
of wires.
11.Remove 3 screws as
photograph, then sep-
erate pump drain and
replace it.
※Check Points for Troubleshooting
1.Separate the Drain Filter and check if any alien substances are
inside the pump (e.g. coins, buttons .., etc.) → Remove these if
found.
2.Check if the wire driving the pump is has come loose → Take
the relevant countermeasure if necessary.
3.When water leaks, check the assembly status of the Clamp
Hose, and Cap Drain → Take the relevant countermeasure if
necessary.
Turn the filter counterclockwise to remove the remaining water.
Figure
Removal and Reassembly _ 25
2015/12/3 16:08:48