Samsung WW6000J Series Service Manual page 22

No. Part
11 COVER-
BACK
12 BELT
13 MOTOR
22 _ Removal and Reassembly
WW22K6800AW-A2.indb 22
Description
1. Remove the 4 screws holding
the Back-Cover at the back of
the washing machine.
1. Separate the belt and then
assembly it.
2. Check if the belt position is at
the center of the Pulley.
Assembling the belt
Place the belt around the
Pulley ( )
and then over the Motor-
Pulley ( ).
1. Separate the Wire Housing
from the motor.
2. Remove the two bolts holding
the motor at the back of the
washing machine.
The 2 screws designated 'A'
which are inside must be also
removed.
3. Separate the motor.
When installing the Belt
around the Motor Pulley, the
bottom of the belt must be
located on the second floor of
the Motor Pulley.
Figure
A
2015/12/3 16:08:47