Motorola MSF 5000 Instruction Manual page 147

MSF
5000
Instruction Manual
Chapter
3
Installation
Preinstallation
37" Cabinets
©
Tip
feet are
not required. The cabinet is stable
providing
other cabinets are
not stacked on top.
©
The welded nut under
the top
plastic cap
center hole is used as an anchor
point for stacking.
©
The
bottom plastic cap center hole
is
used:
O
toanchor
the cabinet to the floor.
O
tosecure the cabinet when
it
is stacked on top of a 37", 46", or 51"
cabinet.
0
Up
to three 37" cabinets
may
be stacked.
46" Cabinets
©
Tip
feet are
shipped and required in
a
stand-alone configuration.
The cabinet
is
highly
unstable without tip
feet.
0
Each tip foot contains two mounting holes to anchor the cabinet to the floor.
©
When stacking or anchoring the cabinet to the floor, the
tip
feet must be
removed.
©
The welded nut under
the top center
plastic cap is used as an anchor point
for stacking.
©
The welded nut on top of the bottom plastic cap:
O
isused for anchoring when stacked on top of
a
51" cabinet.
O
must be broken off and discarded when used for anchoring the
cabinet
to
the floor.
0
Up
to
two 46" cabinets may
be stacked.
51" Cabinets
©
Tip
feet
are
shipped and required in
a
stand-alone configuration. The cabinet
is
highly
unstable without tip
feet.
©
Each tip
foot contains
two mounting holes to anchor the cabinet to the floor
in
a stand alone configuration.
[
When stacking
or anchoring the cabinet to the floor, the
tip
feet
must be
removed.
©
The bendable
weld-nut
tab
under
the top
plastic cap
center hole:
O
allows hoisting of
the cabinet.
O
provides
a
bolt feed-thru, when bent down, for stacking 26", 37",
46", or 51" cabinets on top.
©
The
center feed-thru hole
in
the bottom
plastic
cap:
O
used for anchoring the cabinet to the floor.
O
is used for anchoring
when stacking on
top
of
a
51" cabinet.
©
Up totwo51"
cabinets may be stacked.
68P81092E03 3/19/94
3-5
Tip