Table of Contents
Advertisement
MN000879A01B.fm Page 18 Thursday, July 10, 2014 11:01 AM
18
The LEDs provide a status display indicating error conditions, transmission, and network activity for the 5 GHz
802.11ac (amber) radio and the 2.4 GHz 802.11n (green) radio.
Task
5 GHz Activity LED (Amber)
Unconfigured
On
Radio
Normal
• If this radio band is enabled:
Operation
Blink at 5 second interval
• If this radio band is disabled:
Off
• If there is activity on this band:
Blink interval at 1 time per second
Firmware
On
Update
Locate AP
LEDs blink in an alternating green, red and
Mode
amber pattern using an irregular blink rate.
This LED state in no way resembles normal
operating conditions.
2.4 GHz Activity LED (Green)
On
• If this radio band is enabled:
Blink at 5 second interval
• If this radio band is disabled:
Off
• If there is activity on this band:
Blink interval at 1 time per second
Off
LEDs blink in an alternating green, red and
amber pattern using an irregular blink rate.
This LED state in no way resembles normal
operating conditions
AP-7522 Access Point
Advertisement
Table of Contents
