Stihl FCB-KM Instruction Manual
  1. Manuals
  2. Brands
  3. Stihl Manuals
  4. Lawn and Garden Equipment
  5. FCB-KM
  6. Instruction manual

Stihl FCB-KM Instruction Manual

Hide thumbs Also See for FCB-KM:
Table of Contents

Advertisement

Quick Links

Download this manual
{
STIHL FCB-KM
Instruction Manual

Advertisement

Table of Contents
loading

Related Manuals for Stihl FCB-KM

Summary of Contents for Stihl FCB-KM

  • Page 1 STIHL FCB-KM Instruction Manual...

  • Page 3: Table Of Contents

    English Contents Dear Customer, KombiSystem Guide to Using this Manual Thank you for choosing a quality engineered STIHL product. Safety Precautions and Working Techniques It has been built using modern Using the Unit production techniques and comprehensive quality assurance. Approved KombiEngines...

  • Page 4: Kombisystem

    Caution where there is a risk of future reference. Non- damaging the machine or its individual observance of the safety In the STIHL KombiSystem a number of components. precautions may result in different KombiEngines and KombiTools serious or even fatal can be combined to produce a power injury.
  • Page 5 Transporting the Power Tool are explicity approved for this power tool branches or brush or moving parts of the by STIHL or are technically identical. If machine. Do not wear a scarf, necktie or you have any questions in this respect, jewelry.
  • Page 6 To reduce the risk of burn Make sure you always have good injury, do not touch the 15m (50ft) balance and secure footing. gearbox housing. Always hold the power tool firmly with both hands on the handles. FCB-KM...
  • Page 7 Shut off the engine. exhaustion. for cracks. After finishing work, clean dirt, soil and Replace a damaged blade – plant residue off the cutting attachment – immediately, even if it has only wear gloves to reduce the risk of injury. superficial cracks. FCB-KM...

  • Page 8: Using The Unit

    STIHL recommends you use only and damage to the machine. If you have of dust created. Slightly damp green original STIHL cutting blades – see any questions in this respect, consult a plants are easier to cut. "Special Accessories".
  • Page 9 5 mm (B) in the normal working position. WARNING Do not adjust the deflector. The deflector has been set at the factory so that the arrow on the deflector and the open side point away from the FCB-KM...

  • Page 10: Approved Kombiengines

    Starting the Engine STIHL FS 55 T, FS 55 RT, FS 85 T, FS 85 RT, FR 85 T and FR 130 T Start the cut at no less than half throttle and continue cutting at full throttle.

  • Page 11: Assembling The Unit

    The plug may come out of the drive tube as stop. when you pull off the cap. Push it back into the drive tube as far as stop. Screw in the clamp screw (1) until its head is seated, but do not tighten it down yet. FCB-KM...

  • Page 12: Mounting The Kombitool

    – see "Special Accessories" – into shaft (9) and block the shaft. the hole (3) as far as stop – apply slight pressure and turn back and Screw the mounting nut (6) on to the shaft counterclockwise and tighten it down firmly. FCB-KM...

  • Page 13: Starting / Stopping The Engine

    Make sure you have a safe and secure footing. Hold the unit firmly on the ground with your left hand and press down – do not touch the throttle trigger or lockout lever. NOTICE Do not stand or kneel on the drive tube. FCB-KM...

  • Page 14: Lubricating The Gearbox

    Storing the Machine Replacing the Depth Wheel For periods of 3 months or longer Have a worn depth wheel replaced by a servicing dealer. STIHL recommends Remove, clean and inspect the that you have servicing and repair work cutting blade.

  • Page 15: Replacing The Skirt

    Insert the screw and tighten it down STIHL recommends you use only Remove the washer (2). firmly. original STIHL cutting blades – see Pull the skirt (3) off the lug (4) and "Special Accessories". out of the deflector. Do not resharpen the blade.

  • Page 16: Maintenance And Care

    This includes in particular: Replenish as necessary – see Alterations or modifications to the – "Lubricating the Gearbox" product not approved by STIHL. Depth wheel Using tools or accessories which – are neither approved or suitable for Visual inspection before starting the product or are of a poor quality.
  • Page 17 English servicing dealer. STIHL dealers are regularly given the opportunity to attend training courses and are supplied with the necessary technical information. If these maintenance operations are not carried out as specified, the user assumes responsibility for any damage that may occur. Among other parts, this...

  • Page 18: Main Parts

    English Main Parts Blade Deflector Depth wheel Wingnut Skirt Drive tube FCB-KM...

  • Page 19: Specifications

    105 dB(A) Noise and vibration data measurements KM 100 R with FR 130 T: 105 dB(A) on power tools with the FCB-KM loop handle: 3.7 m/s 4.8 m/s KombiTool include idling and rated Sound power level L to ISO 22868...

  • Page 20: Special Accessories

    Skirt – When repairing the machine, only use Depth wheel – replacement parts which have been approved by STIHL for this power tool or Tools are technically identical. Only use high- quality replacement parts in order to Stop pin –...

  • Page 21: Disposal

    Director Group Product Management Make: STIHL Model: FCB-KM Serial identification: 4137 STIHL products must not be thrown in Displacement the garbage can. Take the product, with KM 55: 27.2 cm accessories and packaging to an with KM 56: 27.2 cm...
  • Page 22 English FCB-KM...
  • Page 24 0458-471-0121 englisch www.stihl.com *04584710121* 0458-471-0121...

Table of Contents