Connecting The Transmitter To An Audio Source - Sennheiser RS 120-W Instruction Manual

Getting started
Connecting the transmitter to an audio
source
▷
Switch your audio source off before connecting the transmitter.
▷
Check the connection possibilities of your audio source (audio
output, usually marked "OUT").
▷
Depending on the connection possibility selected, go to the
respective chapter and follow the instructions on how to connect
the transmitter to an audio source.
Connection possibilities
of the audio source
RCA sockets (ana-
1 A
log)
3.5 mm jack socket
B
(analog)
C
Optical (digital)
Accessories and adapters are available from your Sonova Con-
sumer Hearing partner. You can find your local Sonova Con-
sumer Hearing partner at www.sennheiser-hearing.com/ser-
vice-support.
Connection possibility A: RCA sockets (analog)
1 A
▷
Connect the RCA plugs to the RCA outputs of your audio source
(usually marked "AUDIO OUT"). Connect the red plug to the red
RCA socket and the black plug to the white or black RCA socket.
A
OFF
Connection possibility B: 3.5 mm jack socket (analog)
B
1. Plug the adapter onto the stereo RCA audio cable.
2. Connect the adapter to the 3.5 mm headphone jack of your audio
source.
Adjust the volume of the headphone socket on your audio
source to at least a medium level. This improves the quality of
wireless audio transmission. For detailed information, please
refer to the instruction manual of your audio source.
Connection cable
Stereo RCA audio cable
Stereo RCA audio cable with
adapter for 3.5 mm audio con-
nection
Stereo RCA audio cable with
analog-to-digital converter (to
be ordered separately)
AUDIO OUT
>
11
11
12
L
L
R
RS 120-W | 11