Table of Contents
Advertisement
b
!4
n
b Raise and release the foot, and re-attach it with
the left side pin.
Starting just below zipper bottom stop, sew
across fabric to about 3/8˝ (1 cm) distance from
the basting line.
Turn fabric 90 degrees and sew a seam the
entire length of the zipper tape. Before reaching
the slider, stop the machine with needle in
fabric and raise the foot. Use seam ripper to
open a few inches of basting stitch.
!3 Unstitch basting
!3
!4 3/8˝ (1 cm)
n Unzip a few inches to clear a path for stitching.
At end of seam, sew a few stitches in reverse
to lock. Once both sides of zipper are sewn,
use the seam ripper to open the basting stitch.
52
Advertisement
Table of Contents
