Table of Contents
Advertisement
q
z
w
x
e
c
v
b
Winding the bobbin
z Hold the thread with both hands and guide
the thread from back to front under the thread
guide.
q Thread guide
Guide the thread into the bobbin winder thread
guide as illustrated.
w Bobbin winder thread guide
x Pass the thread through the hole in the bobbin
from the inside to the outside.
Put the bobbin on the bobbin winder spindle.
Hold top of the bobbin winder spindle and
rotate the bobbin until it clicks into place.
e Bobbin winder spindle
c Push the bobbin winder spindle to the right.
v Hold the free end of the thread in your hand
and start the machine.
Stop the machine when the bobbin has been
wound a few layers, and cut the thread close to
the bobbin.
b Start the machine again. When the bobbin is
fully wound, it will stop automatically.
Stop the machine and return the bobbin winder
spindle to its original position by moving it
to the left, and cut the thread with a pair of
scissors. Remove the bobbin from the bobbin
winder spindle.
NOTE:
The machine will not sew until the spindle has
been returned to the left.
18
Advertisement
Table of Contents
