Table of Contents
Advertisement
Problem
Camera image not seen
Flashing battery warning
Table 8
DVDPak2 Troubleshooting
Probable Fault Location
No power to SeeSnake Reel
Connections faulty
Video display set to wrong source
Batteries low
Batteries low
2
Solution
Check power is correctly plugged in
Check the switch on the DVDPak2
Check orientation, seating, and pin condition in the
SeeSnake connection�
Set the video source as described in the Video
Display Set Up section
Recharge batteries or connect the DVDPak2 to an
external power supply�
Recharge batteries or connect the DVDPak2 to an
external power supply�
English - 15
Advertisement
Table of Contents
