Table of Contents
Advertisement
Zero Key
� The DVDPak2 will display the distance from
an interim zero-point in brackets� Press the Zero Key
for local zero and press the Zero Key
to global count� Press and hold the Zero Key
hard reset�
Image Rotation
During inspections, the camera may rotate in the line� To
rotate the camera view as seen on the DVDPak2 monitor,
press the Image Flip Key
While the image will rotate on the DVDPak2 monitor, the
DVDPak2 will record the image as originally displayed�
Microphone Mute
The DVDPak2 has a microphone located on the bottom
left of the screen, as indicated by the Microphone Icon
� The DVDPak2 turns ON the microphone by default� To
turn OFF the microphone, press the Microphone Mute
Key
� When the microphone is OFF, the Microphone
Mute Icon
will appear on the screen� When the micro-
phone is ON, the Microphone Mute LED located under-
neath the hinge of the DVDPak2 will be lit�
Recording an Inspection
NOTICE
Moving the DVDPak2 during recording may
physically damage the disc and may prevent the DVD from
playing. If the DVDPak2 unexpectedly loses power, unsaved
chapters will be lost.
To record an inspection on the DVDPak2, perform the
following functions:
1� Insert a DVDR or DVDRW disc into the DVDPak2�
2� Press the Record Button
screen on the DVDR will show, "Recording" and the
elapsed time� During recording, the Record Button
will also be outlined in red�
3� Press the Record Button
the recording�
4� Press the Stop Button
pressing the Stop Button
the amount of recording time remaining on the
current disc will be shown on the DVDR screen�
Finalizing a Disc
To allow the disc to play back in a DVD player, the disc
needs to be finalized� Unless a rewriteable disc, such
as a DVDRW has been used, a disc can no longer be
recorded to after finalization�
12 - English
2
again to return
to do a
to vertically rotate the image�
on the DVDR� The
to pause and resume
to stop the recording� After
and after a brief pause,
To finalize a disc, perform the following functions:
1� Press the Return Button
Menu� Note that depending on the current menu
location, the Return Button
pushes to allow access to the Main Menu of the
DVDR�
2� Use the Down Arrow Button
and press the Enter Button
3� From the Setup Menu use the Down Arrow Button
to highlight "Finalize Disc" and press the Enter
Button
�
4� When prompted, use the Up Arrow Button to high-
light "Yes" and to confirm the finalization of the Disc
(See Figure 10). To cancel the finalization, press the
Enter Button
to return to the Setup Menu�
Figure 10 – Finalizing the Disc
Play Back Recorded Video
To play back recorded chapters on the DVDPak2,
perform the following functions:
1� Press the Return Button
menu� Note that the Return Button
multiple pushes to allow access to the Main Menu
of the DVDR�
2� Use the Down Arrow Button
Preview" and press the Enter Button
3� If the disc has not been finalized, the last record-
ed video will appear and play back on the DVDR
screen�
4� If the disc has been finalized, a series of thumbnails,
each representing existing chapters recorded on
the disc will be displayed on the screen� Highlight
a thumbnail and press the Enter Button
play back�
Note that audio will not be played during play back, but
will be heard when the disc is played on a DVD player�
to return to the Main
may require multiple
to highlight "Setup"
�
to return to the main
may require
to highlight "DVD
�
to begin
Advertisement
Table of Contents
