Table Of Contents 13.1 System Components; 14 Removal; System And Accessory Components - Wolf FWL-ABLV AG Installation And Operating Instructions Manual

13 System and accessory components

13 System and accessory com-
ponents
13.1 System components
FWL-ABLV fan insert
Article no. 2139956
• Fan insert for installation in flush-mounted/sur-
face-mounted housing. Air volume 30 m³/h,
60 m³/h. In combination with an intelligent cover
for the base load, also possible with 20 m³/h, 40
m³/h, 60 m³/h, or 100 m³/h and the full load 20
m³/h, 30 m³/h, 40 m³/h, 100 m³/h.
• Air outlet adapter with air outlet facing upwards
(factory setting).
• Air outlet adapter with air outlet facing the rear
(can be converted without tools).
FWL-ABLV IB cover
Article no. 2578005
• Standard model
• Air volume 30 m³/h, 60 m³/h
• Installation and operating instructions for FWL-
ABLV - Abdeckungen
FWL-ABLV IB RH cover
Article no. 2578006
• Model with humidity control and intelligent time
module
• Air volume 30 m³/h, 60 m³/h according to fact-
ory setting. Further volumetric flows that can be
set: Base load: 20 m³/h, 30 m³/h, 40 m³/h, nom-
inal load: 40 m³/h, 60 m³/h, 100 m³/h
• Installation and operating instructions for FWL-
ABLV - Abdeckungen
Air filter
FWL- ABLV F-G2-indikator replacement air fil-
ter for FWL-ABLV IB
Article no. 1670452
• 5x FWL- ABLV F-G2-indikator replacement air
filters (filter class G2)
• 5x filter change indicator (TimeStrip)
FWL- ABLV F-G2 replacement air filter for
FWL-ABLV IB RH
Article no. 1670453
• 5x FWL- ABLV F-G2 replacement air filters (fil-
ter class G2)
34 | WOLF GmbH

14 Removal

Dismantling may only be undertaken by a
qualified electrician: Specialist installer qualifica-
tions [} 21].
1. Before accessing the connection terminals,
shut down all supply circuits (switch off mains
fuse), secure against being accidentally
switched back on and position a visible warn-
ing sign.
2. Remove fan insert.
3. Remove all cables.
4. Remove surface-mounted housing from the
wall.
15 Environmentally responsible
disposal
Old devices and electronic components may
only be dismantled by specialists with elec-
trical training. Proper disposal avoids detri-
mental impact on people and the environment
and allows valuable raw materials to be reused
with the least amount of environmental impact.
Do not dispose of the following
components in household waste!
Old devices, wearing parts (e.g. air fil-
ter), defective components, electrical
and electronic scrap, environmentally
hazardous liquids/oils, etc. Dispose of
them in an environmentally friendly
manner and recycle them at the ap-
propriate collection points (→ Waste
Management Act).
1. Separate the components according to mater-
ial groups.
2. Dispose of packaging materials (cardboard,
filling materials, plastics) via appropriate re-
cycling systems or recycling centres.
3. Observe the respective country-specific and
local regulations.
Acknowledgements
© Wolf GmbH. Translation of the original operat-
ing instructions. Misprints, errors and technical
changes are reserved. The brands, brand names
and protected trade marks that are referred to in
this document refer to their owners or their
products.
FWL-ABLV AG
7100910 | 202201