Radio Shack SCP-102 Owner's Manual page 6

Cautions:
You must use a (Class 2 for AC) power
!
source that supplies 3 volts DC power
and delivers at least 300 mA. The cen-
ter tip of the Adaptaplug must be set to positive,
and the plug must properly fit the recorder's
DC 3V jack. Using an AC adapter and plug that
do not meet these specifications could damage
the recorder, the adapter, or the plug.
• Always connect the adapter to the recorder
before you plug it into the power source, and
unplug the adapter from the power source before
you unplug it from the recorder.
1. If necessary, set the adapter's voltage switch to
3V.
2. Attach the size H Adaptaplug to the adapter's
cord with the tip set to positive (+).
3. Insert the barrel plug into the recorder's
jack. This disconnects the internal batteries.
4. Plug the other end of the adapter into the power
source.
6
Preparation
DC 3V