Biostar 915GL-M7 Ultra Manual page 54

915GL-M7 Ultra BIOS Manual
ACPI Suspend Type
The item allows you to select the suspend type under the ACPI
operating system.
The Choices: S1 (POS) (default) Power on Suspend
S3 (STR) Suspend to RAM
S1 & S3 POS+STR
Run VGABIOS if S3 Resume
Choosing Enabled will make BIOS run VGA BIOS to initialize the VGA
card when system wakes up from S3 state. The system time is
shortened if you disable the function, but system will need AGP driver
to initialize the card. So, if the AGP driver of the VGA card does not
support the initialization feature, the display may work abnormally or
not function after S3.
The Choices: Auto (default), Yes, No.
Wake-Up by PCI card
When you select "Enable", a PME signal from PCI card returns the
system to Full On state.
The Choices: Enabled, Disabled (default).
Power On by Ring
An input signal on the serial Ring Indicator (RI) line (in other words, an
incoming call on the modem) awakens the system from a soft off state.
The Choices: Enabled, Disabled (default).
USB KB/MS Wake-Up From S3
This item allows you to enable or disabled USB keyboard wake up
from S3.
The Choices: Disabled (default), Enabled.
Resume by Alarm
This function is for setting date and time for your computer to boot up.
During Disabled, you cannot use this function. During Enabled,
Choose the Date and Time.
Date (of Month) Alarm
You can choose which month the system will boot up.
Time (hh:mm:ss) Alarm
You can choose shat hour, minute and second the system will boot up.
Note: If you have change the setting, you must let the system boot up
until it goes to the operating system, before this function will work.
POWER ON Function
This item allows you to choose the power on function.
The Choices: Button Only (default), Password, Hot Key, Mouse Left,
Mouse Right, Any Key, Keyboard 98.
23