Biostar 915GL-M7 Ultra Manual page 35

915GL-M7 Ultra BIOS Manual
Power Management Setup
This submenu allows you to configure the power management features.
PnP/PCI Configurations
This submenu allows you to configure certain "Plug and Play" and PCI options.
PC Health Status
This submenu allows you to monitor the hardware of your system.
Frequency/ Voltage Control
This submenu allows you to change CPU Vcore Voltage and CPU/PCI clock. (However, this
function is strongly recommended not to use. Not properly change the voltage and
clock may cause the CPU or M/B damage!)
Load Optimized Defaults
This selection allows you to reload the BIOS when the system is having problems particularly
with the boot sequence. These configurations are factory settings optimized for this system.
A confirmation message will be displayed before defaults are set.
Set Supervisor Password
Setting the supervisor password will prohibit everyone except the supervisor from making
changes using the CMOS Setup Utility.
Set User Password
If the Supervisor Password is not set, then the User Password will function in the same way as
the Supervisor Password.
the "User" will only be able to view configurations but will not be able to change them.
You will be prompted with to enter a password.
If the Supervisor Password is set and the User Password is set,
4