BT CARGO GT 15 Operator's Manual page 76

Operating LPG-Powered Forklifts
1. Turn the LPG tank outflow valve counterclockwise to open it.
2. The pipe valve must be open also.
3. Set the engine switch to the "I" (ON) position.
4. Turn the fuel switch "I" (ON) and "O" (OFF) repeatedly for
several times, and leave it in the "O" (OFF) position finally.
5. Wet the hose and the LPG tank and regulator connections
with soap water or neutral detergent. Lock for gas leak.
6. Press the fuel test bar fitted to the regulator a few times
toward the outside of the vehicle.
7. Wet the hose and the regulator and carburetor connections
with soap water or neutral detergent. Lock for gas leak.
• After the gas leak check is completed, wipe off the soap water
or neutral detergent from the wet parts.
• If a gas leak is detected, immediately put out any fire, venti-
late the area and keep the area in a strictly firefree condition.
Then call a qualified BT dealer or service garage.
n Monthly Inspection and Maintenance
Item
Gas leak from pipes and joints (connections)
Damage to pipes and joints (connections)
Regulator adjustment
Crack, damage to and gas leak from the tank
Loose or damaged tank bracket
Damage to electrical wiring, loose terminals
Rotation of liquid drain valve
Gas leak from the regulator body
n Quarterly Inspection and Maintenance
Carburetor and adaptor
Regulator function (to be disassembled and repaired every
year)
Solenoid valve
Filter
© BT Industries AB 180424-040
76