BT CARGO GT 15 Operator's Manual page 34

1 Unlock
2 Remove
Handling the BT DPF-II System (Option)
7. Be sure to remove the power plug.
CAUTION!
Soot combustion interruption (Maintenance interruption).
Plugging out the power cable during soot combustion will
cause the buzzer to sound and the trapping indicator lamp will
come on after one minute. In such a case, plug in the power
cable immediately when the buzzer sounds. When interrupting
soot combustion in progress is unavoidable, press the mainte-
nance switch for about 5 seconds until the buzzer sounds.
Then, the left green lamp and the maintenance lamp will come
on. After about three minutes, when all the indicator lamps are
off, the engine can be activated again. Plug out the power
cable after the maintenance lamp is off. Do not interrupt soot
combustion unless unavoidable as next soot combustion will
be required earlier due to combustion remains.
© BT Industries AB 180424-040
34