Location Requirements - Whirlpool WFR7300S Instruction For Installation, Use And Handling

• Do not cut or remove the ground end of the plug.
• Do not use extension cords or multiple contacts.

LOCATION REQUIREMENTS

Minimum spaces required for the installation (these dimensions must be respected).
For models WFR7300S, WFR7400S, WFR7600S, WFR9000S, WFR9100S
For models: WER7600S, WER9000S, WER9100S
A) 46 cm minimum distance is required between the upper
base of the furniture to the upper piece of furniture.
B) 33.0 cm maximum depth of the upper piece of furniture.
C) 79.5 cm minimum width required in the upper unit.
D) 61 cm minimum distance from the cover that allows to open
the cover.
E) 76.5 cm minimum distance opening width from wall to wall.
F) 60 cm depth of the furniture. For the location of your stove,
see the top view of the furniture.
G) 60 cm height on the opening in the furniture according to
product dimensions.
To embed the range, you need to lift it and rest your range on
the furniture cover, gently slide it back and to the bottom, take
care not to crush any gas pipe or power cable.
Do not lift your range from the handle, or from the front knobs,
open the oven door a little and always lift with the help of two
or more people.
31
In some European factories the letter "W" of the part code mentioned herein will be automatically
30-Mar-2020 13:12:28 EDT | RELEASED
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")