Figure 5-25: Setup Wizard's Configure Wireless Settings Screen; Figure 5-26: Setup Wizard's Wireless Settings Screen - Cisco LINKSYS WAG54GS (EU) User Manual

Wireless-G ADSL Gateway with SpeedBooster
Manually Configuring the Gateway's Wireless Settings
1. If you do not have other SecureEasySetup devices, or want to configure the wireless and security settings
yourself, then click the Enter Wireless Settings Manually button.
2. The Setup Wizard will ask you to enter the settings for your wireless network.
SSID - In the SSID field, enter the name of your wireless network. The SSID must be identical for all devices in
NOTE: An SSID is the network name shared by all devices in a wireless network. Your network's
SSID should be unique to your network and identical for all devices within the network.
the network. The default setting is linksys (all lowercase).
Channel - Select the operating channel for your wireless network. All of your wireless devices will use this
channel to communicate.
Network Mode - From the Network Mode drop-down menu, select the wireless standards running on your
network. If you have both 802.11g and 802.11b devices in your network, keep the default setting, Mixed
Mode. If you have only 802.11g devices, select G-Only. If you have only 802.11b devices, select B-Only. If you
want to disable your wireless network, select Disable.
Device Name - Enter a name for the Gateway in the Device Name field.
Click the Next button to continue or the Back button to return to the previous screen.
Chapter 5: Setting up the Wireless-G ADSL Gateway with SpeedBooster
Using the Setup Wizard
Figure 5-25: Setup Wizard's Configure Wireless
Settings Screen

Figure 5-26: Setup Wizard's Wireless Settings Screen

23