Dyson pure hot+cool HP01 Operating Manual page 17

Replacing the filter unit
1
When your non-washable filter unit needs replacing the appliance will display the pattern
shown. To replace the non-washable filter unit, follow these steps. If the appliance has
been in use, leave for 1 to 2 hours before replacing the filter unit to allow the appliance
to cool down completely. Target to exchange the filter unit will be after approx. one year,
based on 12hrs a day usage.
4
7
6 sec
07.07.2015 15:36 - C76365_HP01_OPMAN_CN_X264A-OPMAN UP ISSUE 06_07_15 76365.indd_15_4c0s
2
5
A clockwise-rotating loading pattern
will be shown on the LED display.
When you have re-assembled your
appliance, press and hold the 'Standby
ON/OFF' button for 6 seconds.
3
6
clik clik
Once the loading pattern is complete,
the appliance will return to its normal
usage.
17