Maintenance; Replace The Hose; Replace A Nozzle - North Star 49436 Owner's Manual

Maintenance

Disconnect the surface cleaner from a pressure washer and ensure that the cleaner is not pressurized
before performing any inspections, maintenance or adjustments to avoid any wildly spraying fluid that
may cause personal injury and property damage.
Maintain your tool in good repair by adopting a program of conscientious repair and maintenance in
accordance with the recommended procedures found in this manual.
For general inspections, see the Before Each Use section.

Replace the Hose

Disconnect the bottom of the hose from the swivel piping and the top from the gun, as shown below,
then reconnect a new hose to these connections.
The Hose-Swivel Connection

Replace a Nozzle

To replace a clogged, worn, or damaged nozzle, simply unscrew it from the sprayer and screw on a
new or cleaned replacement nozzle.
Plugged nozzles can be easily cleaned with a needle or small paper clip.
Page 10 of 16